How To Install A Sissy Bar Harley Davidson

How to Install a Sissy Bar on a Softail

Posted past Creative Eyes on March 27, 2022

If you are having trouble installing asissy bar on your cruiser or cycle, a comprehensive how-to guide is your all-time bet. CycleVisions is hither to assistance you through each step of installation, from commencement to finish.

Installing a Sissy Bar on a Harley-Davidson Touring

Touring models past Harley-Davidson are known for their comfort, just a sissy bar adds an extra level of luxury for your rider. To easily mount a sissy bar, remove the bags and spin the docking spools into place with a screwdriver.

For all-time results, dab some red Loctite on before you fasten the bolts. Earlier the Loctite sets, ensure the spool notches are in the horizontal orientation. Place the mounting hardware and you'll run into the bar slide in behind the stupor and at the front docking bespeak, then rotate downward and click into place.

Sissy bars are designed to snap direct onto bikes like a Touring Harley with ease. You tin can even add more accessories like baggage racks in the future.

Harley Davidson Motorcycle

A sissy bar sometimes comes with a seat pad. If non, yous can buy a seat pad separately online or from the manufacturer. You volition need a ready of metric wrenches to loosen and tighten the bolts as needed. Align the pad with the holes in the mounting organisation. Put in the top bolt and tighten until the seat pad stays in place. Make sure you can still motion the seat around a little. Insert the lower bolts (there should be 2) and align the bottom of the seat to each side of the sissy bar. One time the seat and sissy bar are aligned, then tighten all the bolts. Brand sure the bolts aren't too tight, because they can become stripped.

Installing a Sissy Bar on a Sportster

For this installation, you'll demand gloves and a Torx head screwdriver. Start past placing the sissy bar into the plate bracket. Secure the bar to the mounting system with 4 Torx bolts. Make sure y'all use the right Torx screwdriver head, as the size volition vary depending on the yr of the bike. Adjacent, remove the protective record from the reflectors and install them onto the mountain. Install the sissy bar from the back of the bike, then place the side plate on the front. The side plate should be placed in the groove of cutout in the docking point. Lastly, secure the sissy bar to the bike past firmly pressing and rotating the latches until they are locked in identify. Tug the side panel gently to make sure the latches are locked.

Installing a Sissy Bar on a Low Rider

You'll need a FXDL side mount kit, factory OEM or aftermarket sissy bar, SAE socket gear up, and SAE hex head Allen wrench gear up. The kickoff matter y'all need to do is remove the sissy bar, side mount kit, and all other parts from the packaging and examine them to brand sure they aren't damaged. Next, discover the fender support bars on each side of the rear bicycle fender. Loosen the bolts on the support fender that spike onto the rear turn signals. Slide the mounting kit betwixt the fender back up bar mountain and rear fender and tighten the bolts. Lastly, attach the sissy bar to the FXDL side of the mountain kit. If you lot have any more questions well-nigh sissy bar installation, give CycleVisions a call today.